OR TRIJICON/HOLOSUN MOUNTING KIT FOR S-02, ALU BLACK

Backing plate for optics ready (OR) Česká zbrojovka pistol models of the CZ SHADOW 2 OR series for Trijicon RMR / SRO collimators and selected models of the Holosun brand.

Weapon Compatibility

• KMR S-02

Compatibility with collimators

• Trijicon RMR / SRO
• Holosun HE508T GR X2
• Holosun HS407C X2
• Holosun HS507C X2
• Holosun HS507C GR X2

Backplane Specifications

• material - steel
• made in the Czech Republic
• original CZ product
• installation screws in the package

Board installation

For OR weapons, you first unscrew the cover of the bolt on the weapon, then carefully clean and degrease the area where the plate is to be placed. Then it is enough to install the appropriate base plate and properly tighten with the included screws.We recommend sticking the screw threads with e.g. blue Loctite.You are just installing the collimator itself on this plate, where again we recommend to glue the threads of the screws with Loctite for greater strength.

Note: For collimators where it is not possible to replace the battery from the side (e.g. Holosun), but the collimator needs to be removed from the weapon during replacement (e.g. Shield, Trijicon RMR, etc.) we recommend threaded glue , which can still be loosened (blue Loctite) - don't use the red one, which you won't tear off, or you could possibly damage the thread.