Baseplate for optics ready (OR) KMR pistol models of the W-02 UMBRA OR, W-02 CUDA OR, L-02 UMBRA OR SR, L-02 SPECTRA OR, L-02 EMIG OR for Aimpoint Acro collimators.
First unscrew the cap cover of the gun, then carefully clean the pad placement area. Then it is enough to install the appropriate base plate and properly tighten the included screws. We recommend sealing the screw threads further with a blue Loctite.
DO NOT USE RED LOCTITE!
Backing plate for optics ready (OR) KMR pistol models for C-More RTS / STS collimators
Weapon Compatibility
W-02 UMBRA OR
W-02 CUDA OR
L-02 UMBRA OR SR
L-02 SPECTRA OR
L-02 EMIG OR
Compatibility with collimators
Aimpoint Acro
Backplane Specifications
material - steel
made in the Czech Republic
original CZ product
installation screws in the package
Board installation
For OR weapons, you first unscrew the cover of the bolt on the weapon, then carefully clean and degrease the area where the plate is to be placed. Then it is enough to install the appropriate base plate and properly tighten with the included screws.We recommend sticking the screw threads with e.g. blue Loctite.You are just installing the collimator itself on this plate, where again we recommend to glue the threads of the screws with Loctite for greater strength.
Note: For collimators where it is not possible to replace the battery from the side (e.g. Holosun), but the collimator needs to be removed from the weapon during replacement (e.g. Shield, Trijicon RMR, etc.) we recommend threaded glue , which can still be loosened (blue Loctite) - don't use the red one, which you won't tear off, or you could possibly damage the thread.
Product Details
0091-01208-0001
Data sheet
For Weapons KMR
KMR L-02 EMIQ (OR) KMR L-02 SPECTRA UNTIL 2023 KMR L-02 UMBRA UNTIL 2023 KMR W-02 CUDA UNTIL 2023 KMR W-02 UMBRA (OR)
Steel plate for mounting a collimator on KMR S-02 pistols in Optics Ready design. This plate is intended for mounting collimators using the Docter/Noblex standard. This plate will allow the fitting of the following collimators: Vortex Venom Doctor Noblex Sight C Doctor Noblex Sight 2+ Doctor Noblex Sight III We recommend entrusting the replacement of...
Steel plate for mounting a collimator on KMR S-02 pistols in Optics Ready design. This plate is designed for mounting Shield RMS collimators. We recommend entrusting the replacement of spare parts to a specialist workshop.
Mounting plate serving as a reduction between the dovetail sight and optoelectronic sights for KMR pistol models of the S-02 model series and the Trijicon RMR collimator. We recommend entrusting the replacement of spare parts to a specialist workshop.
Steel plate for mounting a collimator on KMR S-02 pistols in Optics Ready design. This plate is intended for mounting Vortex Razor collimators. We recommend entrusting the replacement of spare parts to a specialist workshop.
Backing plate for optics ready (OR) pistol models KMR series W-02 UMBRA OR, W-02 CUDA OR, L-02 UMBRA OR SR, L-02 SPECTRA OR, L- 02 EMIG OR for Vortex Razor collimators. Mounting plate serving as a reduction between the Optics Ready interface and optoelectronic sights.
Backing plate for optics ready (OR) pistol models KMR series W-02 UMBRA OR, W-02 CUDA OR, L-02 UMBRA OR SR, L-02 SPECTRA OR, L- 02 EMIG OR for Leupold collimators.
Steel plate for mounting a collimator on KMR S-02 pistols in Optics Ready design. This plate is intended for mounting Leupold Delta Point collimators. This plate provides a stable and secure mounting of the collimator on your pistol, which is essential for shooters who prefer fast and accurate aiming when shooting. We recommend entrusting the replacement...
Baseplate for optics ready (OR) KMR pistol models of the W-02 UMBRA OR, W-02 CUDA OR, L-02 UMBRA OR SR, L-02 SPECTRA OR, L-02 EMIG OR for Aimpoint Acro collimators.
We use third-party cookies to enhance your browsing experience, analyze site traffic and personalize content, ads. Learn more.
