Banner
One of the exhibitors at this jubilee edition was KMR Precision Arms s.r.o.
Look for our KMR stand at the shooting range in Corinth between 24 and 30 September 2023!
Carefully crafted from high-quality materials and components, assembled into a perfectly balanced system with an...
Congratulations to all our shooters for their excellent placements at the Atlas Open 2023 shooting competitions in...
Quick and gentle at the same time. This model is for the widest range of users and is thus the most versatile pistol...
Combine the colored accessories of the gun according to your taste. In addition to colored stocks, you can also...
Naše střelkyně Enikö Kubicová a Ajka Ridošková to na Mosquito Match L3 2023 pěkně rozparádily!
The KMR L-02 EMIQ will be on the shelves in a little while. Already now, but some of our shooters shoot and compete...
We have to say that we had a great time at the IWA OutdoorClassic 2023 last long weekend. A stand full of you – the...
Backing plate for optics ready (OR) pistol models KMR series W-02 UMBRA OR, W-02 CUDA OR, L-02 UMBRA OR SR, L-02 SPECTRA OR, L- 02 EMIG OR for Vortex Razor collimators.
Mounting plate serving as a reduction between the Optics Ready interface and optoelectronic sights.
Backing plate for optics ready (OR) KMR pistol models for C-More RTS / STS collimators
For OR weapons, you first unscrew the cover of the bolt on the weapon, then carefully clean and degrease the area where the plate is to be placed. Then it is enough to install the appropriate base plate and properly tighten with the included screws.We recommend sticking the screw threads with e.g. blue Loctite.You are just installing the collimator itself on this plate, where again we recommend to glue the threads of the screws with Loctite for greater strength.
Note: For collimators where it is not possible to replace the battery from the side (e.g. Holosun), but the collimator needs to be removed from the weapon during replacement (e.g. Shield, Trijicon RMR, etc.) we recommend threaded glue , which can still be loosened (blue Loctite) - don't use the red one, which you won't tear off, or you could possibly damage the thread.
Data sheet
Reference: 0091-01207-0001
Brand: KMR Precision Arms
Reference: 0091-01106-0101
Brand: KMR Precision Arms
Reference: 0091-01102-0101
Brand: KMR Precision Arms
Reference: 0091-01105-0101
Brand: KMR Precision Arms
Reference: 0091-01208-0001
Brand: KMR Precision Arms
Reference: 0091-01203-0001
Brand: KMR Precision Arms
Reference: 0091-01204-0001
Brand: KMR Precision Arms
Reference: 0091-01103-0101
Brand: KMR Precision Arms
Reference: 0091-01101-0101
Brand: KMR Precision Arms
Reference: 0091-01206-0001
Brand: KMR Precision Arms
Reference: 0091-01104-0101
Brand: KMR Precision Arms
Reference: 0091-01202-0001
Brand: KMR Precision Arms
Reference: 0091-01107-0101
Brand: KMR Precision Arms
Reference: 0091-01108-0101
Brand: KMR Precision Arms
Backing plate for optics ready (OR) pistol models KMR series W-02 UMBRA OR, W-02 CUDA OR, L-02 UMBRA OR SR, L-02 SPECTRA OR, L- 02 EMIG OR for Vortex Razor collimators.
Mounting plate serving as a reduction between the Optics Ready interface and optoelectronic sights.
We use third-party cookies to enhance your browsing experience, analyze site traffic and personalize content, ads. Learn more.
